Gardner Mixers were ahead of their time, shown here a circa 1920 Gardner Ribbon Mixer featuring an inlet with an oscillating plate to control the feed rate and a brush sifter to enhance the ingredients before mixing.
Launching Vent tec® 2.0 as a world first:
High-performance mixer aspiration ensures constant process conditions
Detmold/Germany, July 2016 – With the launch of Vent tec® 2.0, MTI Mischtechnik presents a new generation of its proven high-performance aspiration systems for heating/cooling mixer combinations. Unlike conventional solutions, these devices are the first ever to control their operation autonomously as a function of actual process parameters, thereby providing constant processing conditions irrespectively of changes in process and ambient conditions. Accordingly, they significantly facilitate the task of maintaining uniformly high product quality in the plastics processing and chemicals industry.
Recycling, mixing and crushing technology in Turkey.
New subsidiary is the product of a long-standing business relationship.
Sonthofen, Germany, December 1, 2015 – BHS-Sonthofen has founded BHS-Sonthofen Turkey Makina Sanayi Ltd. Sti. in Turkey in October with its corporate headquarters in Istanbul. The company enables BHS to offer its customers expert advice at the local level at the gateway between Europe and Asia. The newly founded subsidiary is a joint venture which has developed from a long-standing business relationship with DTR Industries.
The foundation of the new subsidiary means that BHS will be able to meet the increasing demand for the recycling, mixing and crushing technology products from Sonthofen on the Turkish market.
A number of machines and installations have been in operation in these segments for several years in Turkey, e.g. for processing slag and mixing concrete, as well as crushers for the production of chippings and sand.
The corporate headquarters is located in Istanbul, within sight of Sabiha Gökçen airport. Ramazan Ergin is the General Manager of BHS Turkey; he will continue as General Manager of DTR Industries, a company which also represents other German machine manufacturers in Turkey. Ergin has known the machines of BHS for a long time. High-quality advice is guaranteed from the very first day, owing to the expertise he has acquired in dealing with them.
Alper Sahin is the National Sales Manager for Turkey. He knows the recycling industry inside and out from his job at a company in the sector, where he worked for several years.
Dennis Kemmann, the General Manager of BHS-Sonthofen GmbH, sees enormous potential in Turkey: “We have noticed a constantly growing awareness of the importance of recycling reusable materials and environmental protection in Turkey: Many local authority areas are investing in waste recycling. There is also a large market for scrap. The construction industry is experiencing dynamic growth, which not only creates a growing demand for concrete mixers but also for cement. We are supplying systems for this market which enable refuse-derived fuels to be used to a high degree.”
Address and contact data of BHS Turkey:
BHS-Sonthofen Turkey Makina Sanayi Ltd. Sti.
Yenisehir Mah. Sumbul Sok. No: 8/1/113
34912 Pendik – Istanbul / Turkey
Phone: +90 216 9092-490
Fax: +90 216 9092-492
BHS-Sonthofen is an owner-operated group of companies in the machinery and plant engineering field, based in Sonthofen, Germany. The company offers technical solutions for mechanical process engineering, concentrating primarily on mixing, crushing, recycling and filtration. With more than 350 employees and several subsidiaries, BHS Sonthofen has a global presence.
The Mixing Technology division produces batch and continuous mixers and offers a full range of process technology for mixing. The twin-shaft batch mixer, which is considered a global benchmark in the concrete industry, is an important product.
The Crushing Technology division manufactures impact crushers and mills with vertical and horizontal shafts, which are used for processing mineral substances, e.g. in quarries, gravel works and mining.
The Recycling Technology division offers a wide range of machines and systems for the recycling industry. The product spectrum covers the processing of brittle-hard waste materials such as electronic waste, slag, shredder residual fractions etc., as well as resilient materials such as tires, cables, and refuse-derived fuels.
The AVA-Team says “Thank You” for a very successful POWTECH 2013.