Tag Archives: mixer

BHS-Sonthofen: New BHS Concrete Mixer for Grand Paris Express

Sonthofen, Germany – Unibéton, a French subsidiary of the HeidelbergCement Group, is producing specific ready-mix concrete for the “Grand Paris Express” project. To optimize the production process, the company replaced a planetary mixer with a twin-shaft mixer from BHS-Sonthofen. For the first time in France, the mixer was installed with frequency converters to enhance operations. Continue reading BHS-Sonthofen: New BHS Concrete Mixer for Grand Paris Express

Lödige: Application-specific Ploughshare Mixer for Lithium Battery Masses

Paderborn, Germany – The processing of the required raw materials for the production of lithium batteries is subject to exacting quality requirements – up to the limits of technical feasibility. For example, the contamination of cathode masses by foreign ions, in particular iron, must be prevented at all costs. Lödige has addressed this challenging process-technical task with a special version of the proven Ploughshare mixer. Continue reading Lödige: Application-specific Ploughshare Mixer for Lithium Battery Masses

Ajax Equipment: Mixers for Frozen Potato Production at Agristo

Bolton, United Kingdom – Solids handling specialist, Ajax Equipment, has supplied leading European pre-fried and frozen potato product producer, Agristo, with two continuous mixers featuring an enhanced mirror polish finish. The stainless steel Ajax machines will be used to mix grated potato with various additives including flavourings to produce a range of potato products. Continue reading Ajax Equipment: Mixers for Frozen Potato Production at Agristo

Ajax Equipment: The Lynflow Chute – An advanced Design for Flow

Bolton, United Kingdom – The design the Ajax Equipment LynflowTM Chute arose from a demanding duty requested by a user, who wanted to monitor the rate of discharge down a chute from an Ajax continuous mixer. The task was difficult because the product had poor flow properties, the very small rate of discharge from the mixer fluctuated and was spread over a relatively wide path, whereas the monitoring device required a steady bed thickness of at least 10 mm deep.

Continue reading Ajax Equipment: The Lynflow Chute – An advanced Design for Flow

Munson Machinery: Rotary continuous Mixer for high-volume, low-cost Applications

Utica (NY), United States A new Rotary Continuous Mixer model CM-16X4-SS from Munson Machinery provides continuous, high-capacity mixing of bulk materials with or without liquid additions at low cost per volume of output. Powered by a 0.37 kW explosion-proof motor, the mixer consists of a 41 cm diameter by 122 cm long cylindrical drum with fixed internal mixing flights that impart a gentle, back-flow mixing action free of dead spots.

Continue reading Munson Machinery: Rotary continuous Mixer for high-volume, low-cost Applications

Ajax: Compact Silo Cascade Mixer Space-Saving Alternative to conventional Conical Hoppers

Bolton, United Kingdom – Solids handling equipment maker, Ajax Equipment, announced a new type of silo cascade mixer enabling batch powder processing in squat, square mixing containers in place of tall conventional conical hoppers, for plants where space is limited. The mixer combines mass flow and intake recycling screw technology that minimises power consumption whilst providing efficient mixing. Continue reading Ajax: Compact Silo Cascade Mixer Space-Saving Alternative to conventional Conical Hoppers

Lödige continuously operating Ploughshare Mixer KM 2000: One for All

Paderborn, Germany – Universal applicability, consistent reproducibility, maximum homogeneity of the end product and short residence times: These features characterize the continuous Ploughshare® mixer KM developed by Lödige Process Technology. Therefore, it is the right type of mixer for a multitude of applications. The low-maintenance KM is suitable for processing powdery, fibrous or granular solids as well as liquids and pastes. Granulation processes can also be carried out with the continuous mixer with minimum residence time.

Continue reading Lödige continuously operating Ploughshare Mixer KM 2000: One for All

Munson: Rotary Batch Mixer with integral Lump Breaker achieves Uniformity in 1 to 3 Minutes

Utica (NY), USA — A new MUNSON® Rotary Batch Mixer with integral Lump Breaker provides inline de-agglomeration of compacted bulk materials before blending batches gently with total uniformity in one to three minutes.

Continue reading Munson: Rotary Batch Mixer with integral Lump Breaker achieves Uniformity in 1 to 3 Minutes

Jansen & Heuning delivers Feed Mixer for 70.000 cows in Saudi Arabia

Groningen, NetherlandsJansen & Heuning supplied a fully automated feed installation for a dairy farm in Saudi Arabia with 70.000 cows. Two newly developed concentrates mixers, each with a drive power of 110 kW, are the heart of this installation.

Continue reading Jansen & Heuning delivers Feed Mixer for 70.000 cows in Saudi Arabia

Coperion: The new MIX-A-LOT bulk material mixer for high-speed, gentle and cost-efficient homogenization

Weingarten, Germany, September 2017 – At this year’s Powtech 2017 (September 26-28, 2017, Nuremberg, Germany), Coperion will be presenting its newly developed mechanical bulk material mixer MIX-A-LOT at booth 4-290 in hall 4. As an optional addition to the compounding plants made by this manufacturer, the unit ensures particularly efficient, high-speed and gentle homogenization of the fed material. The readily accessible and easy to clean MIX-A-LOT is available in three sizes for throughput rates up to 5 t/h, there is also an ATEX version. The surface of the mixing chamber can be electro polished.

Continue reading Coperion: The new MIX-A-LOT bulk material mixer for high-speed, gentle and cost-efficient homogenization