The Jim Way 3D tracker roller, which employs highly effective tracking action, quickly ensures the belt alignment. In addition, the diamond groove rubber on the surface of the part sheds water and residues from belt.
Whitstable, Kent – Flexicon has introduced a new bulk bag lifting frame with telescoping arms that accommodates bulk bags produced in an increasing range of sizes.
The lifting frame is optional on all BFC models of Flexicon’s BULK-OUT® discharger line, and available for up to two tonne capacities to replace conventional lifting frames of any make or model of discharger that employs a hoist to position and suspend bulk bags.
Whitstable, Kent – A new automated Bulk Bag Weigh Batching System from Flexicon meters ingredients into a FLEXI-DISC™ Tubular Cable Conveyor that transports batches of a specified weight to downstream processing equipment, dust-free.
Whitstable, Kent – A new Series of BULK-OUT® Half-Frame Bulk Bag Dischargers by Flexicon features low-cost frames of variable heights and offsets to fit restricted areas previously utilised for dumping of smaller containers such as sacks, pails, drums, boxes and bins.
Whitstable, Kent, U.K. – A new Rear-Post Bulk Bag Filler features a patented Swing-Down® fill head that pivots to the operator at floor level for safe, ergonomic spout connections, and a low-profile loading deck that allows removal of filled bags using a pallet jack.
The “SiLex” mechanical discharge aid is used with poorly-flowing and not fluidizable bulk materials. It is incorporated into silos, bunkers and containers that may be round or even angular. Due to its low overall height and its simple mode of operation, it can usually be retrofitted to existing silos and containers without the need for major conversion work.
Designing and analyzing feeders, hoppers, and silos can be challenging because there are so many goals that have to be satisfied for successful operation. Analytical solutions exist but the results vary widely for a given design so which one do you pick?
An overland belt conveyor designed by Overland Conveyor Company, Inc., Lakewood, CO, USA and commissioned in 2006 carries 1000 tons per hour of aggregate down the mountain and carries 400 tons per hour of refuse back up to be disposed in the pit.
Jim Way Primary Belt Cleaner: C1UD (Patented Product)
The interface of two colors, which is a wear line, obviously indicates when the blade should be replaced. In addition, with the arc-shaped back side, the blades remove carryback effectively and without any residue to maintain the good scraping performance. The blade-to-belt pressure should is checked on the inspection window of tensioner.
STAG pressure conveying vessel for pneumatic conveying of bulk materials by dense phase system.
STAG Schubsender zur pneumatischen Förderung von Schüttgütern im Dichtstromverfahren
STAG DenseFlow pipe for pneumatic conveying systems with pressure conveying vessel. Prevent blockages.
STAG Dichtstromrohre zur pneumatischen Förderung mit Schubsendern im Dichtstromverfahren. Zur Verhinderung von Verstopfungen.