SOLIDS Basel 2015:
Top trade show for decision makers and industry experts
With over 1,000 visitors to the fourth edition show, SOLIDS Basel 2015 reconfirmed its leading position in Switzerland as the event for granules, powders and bulk solids technologies. “The discussions onsite and the positive feedback from 83 exhibitors have been very gratifying,” says Daniel Eisele, Event Director for the show organiser, Easyfairs. “The national flagship show on process engineering for solids and powders has again proven its intrinsic value here in Switzerland.”
Over the course of two show days (6 and 7 May 2015), decision makers – from both the supply and the demand sides – took advantage of SOLIDS Basel 2015 as a platform for intensive networking and focused business. The exhibitors – a mix of regional and international industry players – displayed a range of process engineering technologies for bulk solids of all kinds. They presented products, solutions and services especially in the areas of dosing, measuring, sieving, mixing, crushing and transporting. The show offerings are relevant for such diverse industries as the food and drink sector, chemicals and pharmaceuticals, mechanical engineering, construction and mining, as well as recycling and disposal.
Complementing the exhibition was an attractive programme of renowned speakers, expert seminars and best-practice case studies lined up by the show organiser and its partners. For the first time ever and to the visible delight of the audience, on the afternoon of the first show day IN DEX® e.V. ran its intensive workshop on industrial explosion protection; the lectures on recycling technologies, hygienic design and solids technologies were also well-attended. Informative offerings such as the guided show tours made it easy for trade visitors to get an overview of what was on offer.
A further highlight of the show was the SES award ceremony, held during the after show aperitif. The criteria for winning included the number of visitors invited by the exhibitor and the number of clicks on the exhibitor’s online profile on the show website, as well as the number of products offered there. The award is bestowed at each of the individual shows in the SOLIDS European Series: in Antwerp, Basel, Dortmund, Kraków, Rotterdam and St Petersburg. The winner of the SES award at SOLIDS Basel 2015 was the exhibitor EMDE Industrie-Technik GmbH from Nassau. Hansjürg Emde accepted the €1,000 prize on behalf of his company.
Solids Basel 2015: Photo Gallery
Copyright © 2015 by Online Services Dr. Wohlbier
Comments, corrections, suggestions, more or better photos and photo removal requests should be addressed to Dr. Reinhard Wohlbier at email@example.com
REMBE GmbH Safety + Control
Stefan Penno, Managing Director (left)
Experts in all industries worldwide
When consulted by companies from the food, wood, chemical and pharmaceutical industries around the globe, REMBE responds as the specialist for process safety and explosion protection. As an independent, personally managed family-owned business with more than 120 staff members, we unite inventive talent with the highest level of quality. More than 40 years of worldwide experience in various industrial applications and projects and technical engineering expertise mean our range of products offer genuine solutions to any application: from standard products right up to highly technical customised solutions.
Since 1969 WAMGROUP® has been designing, engineering and manufacturing equipment for bulk solids discharging, conveying, dosing, mixing solids with solids and solids with liquids, for dust filtration, and for solids-liquid separation. This has led to the most comprehensive product range available on the market today and has made WAMGROUP a world leader in the supply of components for dry solids storage, handling and processing plants.
Brabender Technologie is a leading supplier of machinery and systems for bulk ingredient feeding, weighing, discharging and flow metering with a world-wide consulting, sales and service network.
• Gravimetric metering feeders
• Volumetric metering feeders
• Weigh-batching systems
• Discharge aids
• Flow meters
STANELLE Silos + Automation
STANELLE Silos + Automation GmbH is your reliable partner with innovative silo products, services and solutions
STANELLE is the German brand for tailored problem services and solutions in silo technology and silo automation. With more than 40 years of experience we are the reliable and trusted partner you are looking for. As a powerhouse for innovations, STANELLE always delivers cutting edge technology for its clients. Optimize your productivity, cut costs and protect the environment with STANELLE top-quality products made in Germany.
Through practice-oriented services and solutions, STANELLE ensures a smooth and optimized material flow within your business. Competent experts support our clients in every phase of a project and guarantee a first class delivery. At STANELLE we have a simple taste: We are always satisfied with the best to exceed your expectations!
Since 1953 we produce highly porous sintered materials at our site in Dortmund. From our materials Siperm R (AISI 316L), Siperm B (CuSn10), Siperm HP (PE-UHMW) and Siperm HP antistatic (PE-UHMW) we produce filter plates, filter cartridges, filter tubes, filter discs, molded parts, suction pipes, silencers, ready-to-install-discharge and loosening aids as well as aeration bottoms/fluidization bottoms in the form of welding constructions. Generally, we produce welding constructions according to customer drawings.
Highly porous sintered materials can inter alia be used for the following applications: fluidization and discharge, homogenization, aeration and de-aeration, extraction, compaction of bulk material, volume reduction, cooling and drying, forming, inertisation, filtration, silencing, safety technology, explosion protection and storage of liquids.
Depending on the requirements the possibility of the controlled adjustment of the specific material properties allows the perfect adjustment of the sintered material to the particular process requirements.
Established in 1944, Martin Engineering is the leading international developer, manufacturer and supplier of innovations to make the handling of bulk materials cleaner, safer and more productive. Martin offers technologies that boost flow, reduce dust and spillage, extend component life and reduce downtime, resulting in improved operating environments and increased profitability.
Our Global Team of experts from every part of the world, work together to produce and manufacture high quality products that deserve the Martin seal of approval. Our service technicians average 27 years of experience in bulk material handling. Our product engineers and development teams work side by side with our sales and service leaders to share innovative ideas within our corporate community around the globe and to help facilitate the development of new products that make bulk material handling cleaner, safer and more productive worldwide. This experience and expertise made Martin Engineering the leader in bulk material handling solutions.
AKO Armaturen & Separations
AKO Pinch Valve and Knife Gate Valve manufacturer
AKO Armaturen & Separationstechnik GmbH is the European market leader for air operated Pinch Valves. AKO is a family-run company, which has been manufacturing reliable, cost-effective and innovative Pinch Valves for 28 years.
In addition, AKO’s product portfolio includes a wide range of different mechanical pinch valve series, knife gate valves, pipe manometer, pressure relief valves, sleeves for pinch valves and pinch valve or knife gate valve accessories.
DMN-WESTINGHOUSE designs and manufactures a complete range of rotary valves, diverter valves and other related components for the bulk solids handling industry. Offering tailor made solutions for chemical, food, plastics and pharmaceutical industries.
Main products are airlocks, blowing seals, diverters ( plug, tube, multi-port, flap, ball ), slide gate valves, discharge units, pipe couplings, pressure relief valves. The components are available in a variety of materials, such as stainless steel, cast iron, aluminium. USDA approved and explosion-proof models are available.
CinchSeal Planungsbüro Aachen
J. & E. MAIER AG
Mecatex + Prodima Mixers
REMA Tip Top
Schrage Conveying Systems
SILO WORLD and bulk-online
SES award at SOLIDS Basel 2015
The winner of the SES award at SOLIDS Basel 2015 was the exhibitor EMDE Industrie-Technik GmbH from Nassau, Germany. Hansjürg Emde accepted the €1,000 prize on behalf of his company.
Welcome to SOLIDS Basel 2016
Switzerland’s most important business platform for granules, powder & bulk solids and recycling technologies
On 16th and 17th of November 2016, the 5th edition of SOLIDS Basel will take place at Messe Basel, hall 2. SOLIDS Basel 2016 is the leading trade show for powder and bulk technologies in Switzerland. The 3rd edition of RECYCLING-TECHNIK will be co-located again at the same time, as integrated part in the hall.