Category Archives: News from Industry

BHS-Sonthofen strengthens its presence in Turkey

Recycling, mixing and crushing technology in Turkey.
New subsidiary is the product of a long-standing business relationship.

 

Sonthofen, Germany, December 1, 2015    –  BHS-Sonthofen has founded BHS-Sonthofen Turkey Makina Sanayi Ltd. Sti. in Turkey in October with its corporate headquarters in Istanbul. The company enables BHS to offer its customers expert advice at the local level at the gateway between Europe and Asia. The newly founded subsidiary is a joint venture which has developed from a long-standing business relationship with DTR Industries.

The foundation of the new subsidiary means that BHS will be able to meet the increasing demand for the recycling, mixing and crushing technology products from Sonthofen on the Turkish market.

A number of machines and installations have been in operation in these segments for several years in Turkey, e.g. for processing slag and mixing concrete, as well as crushers for the production of chippings and sand.

The corporate headquarters is located in Istanbul, within sight of Sabiha Gökçen airport. Ramazan Ergin is the General Manager of BHS Turkey;  he will continue as General Manager of DTR Industries, a company which also represents other German machine manufacturers in Turkey. Ergin has known the machines of BHS for a long time. High-quality advice is guaranteed from the very first day, owing to the expertise he has acquired in dealing with them.

Alper Sahin is the National Sales Manager for Turkey. He knows the recycling industry inside and out from his job at a company in the sector, where he worked for several years.

Ramazan ERGIN, General Manager of BHS Turkey
Ramazan ERGIN, General Manager of BHS Turkey

Dennis Kemmann, the General Manager of BHS-Sonthofen GmbH, sees enormous potential in Turkey: “We have noticed a constantly growing awareness of the importance of recycling reusable materials and environmental protection in Turkey: Many local authority areas are investing in waste recycling. There is also a large market for scrap. The construction industry is experiencing dynamic growth, which not only creates a growing demand for concrete mixers but also for cement. We are supplying systems for this market which enable refuse-derived fuels to be used to a high degree.”

Address and contact data of BHS Turkey:

BHS-Sonthofen Turkey Makina Sanayi Ltd. Sti.

Yenisehir Mah. Sumbul Sok. No: 8/1/113

34912 Pendik – Istanbul / Turkey

Phone: +90 216 9092-490

Fax: +90 216 9092-492

 

About BHS-Sonthofen

BHS-Sonthofen is an owner-operated group of companies in the machinery and plant engineering field, based in Sonthofen, Germany. The company offers technical solutions for mechanical process engineering, concentrating primarily on mixing, crushing, recycling and filtration. With more than 350 employees and several subsidiaries, BHS Sonthofen has a global presence.

The Mixing Technology division produces batch and continuous mixers and offers a full range of process technology for mixing. The twin-shaft batch mixer, which is considered a global benchmark in the concrete industry, is an important product.

The Crushing Technology division manufactures impact crushers and mills with vertical and horizontal shafts, which are used for processing mineral substances, e.g. in quarries, gravel works and mining.

The Recycling Technology division offers a wide range of machines and systems for the recycling industry. The product spectrum covers the processing of brittle-hard waste materials such as electronic waste, slag, shredder residual fractions etc., as well as resilient materials such as tires, cables, and refuse-derived fuels.

 

Photo Gallery: Solids & Recycling-Technik Dortmund 2015 – Part II

On November 4 and 5, 2015  these two powder/bulk trade shows took place in Dortmund, Germany:

Schüttgut (SOLIDS) +
Recycling Technology

Schüttgut_Logo_2015Recycling_Logo_2015

As in previous years, The Powder/Bulk Portal presents a Photo Gallery which may help future potential exhibitors and visitors to plan their attendance and visit.

The presentation is divided into 10 Parts (Part I to Part X). Please search specific Parts or companies in the Contents below:

 

CONTENTS

(Please scroll down)

Part II: The bulk-online eDirectory Members.

In Part II, those exhibitors are presented who have a detailed listing in the eDirectory Search Engine.

4B Deutschland, AKO Armaturen, ALDAK GmbH Vibrationstechnik, Berthold Technologies, DMN-Westinghouse, ecutec s.l., ESI Eurosilo BV, FLEXCO, Haver & Boecker, Hense Waegetechnik, Fr. Jacob Söhne, MBA Instruments, Russell Finex

Part III:

Advanced Cyclone Systems, Aerzener Maschinenfabrik, amixon – Mixing Technology, AMMAG, AVA-Huep, Claudius Peters, Derichs, Dinnissen Process Technology, DURUM Verschleiss-Schutz, Endress+Hauser Messtechnik, Frewitt, Friedrich Schwingtechnik, Fuchs Maschinen, Gericke, GKM Siebtechnik, Goudsmit Magnetic Systems, Gough GmbH, GreCon, HECHT Technologie, HENNLICH Engineering, Hosokawa Alpine / Micron B.V., KREISEL, LIEBHERR Feuchtemessung, mucon / Keyser & Mackay, PENKO Engineering, SEGLER-Förderanlagen, TBMA Europe, UWT, Vossloh Kiepe, VSR Industrietechnik, Wieland Lufttechnik

Part IV:

AVITEQ Vibrationstechnik, BOSCHE Wägetechnik, BUNTING Magnetics, CinchSeal Planungsbüro Aachen, Daxner, Derichs, EMDE, Herding, HOSCH-Fördertechnik, Italvibras, Kalenborn, KOBATO, Köbo-Dongchua, Masterflex, MehrTec, NERAK, NetterVibration, PIAB, Quadrant EPP Deutschland, RUD Ketten, Th. Scholten, Schulte Strathaus, Simatek Bulk Systems, Skako Vibration, SWECO Europe, Tecno Rulli, Thorwesten Vent, VEGA, Werner Doppstadt

Part V:

A.H. Meyer, Siloanlagen Achberg, Achenbach Metalltechnik, ALTHAMMER, Ambelt Förderbänder, AMF-Bruns, ami Systemtechnik, Andritz, Apullma, Arthur Krüger, Assonic Mechatronics, beba-Mischtechnik, Bückmann, bulk-online + SILO WORLD, SCHAD Förderelement, CERA SYSTEM Verschleissschutz, Con-Tec, Contex Verschleisstechnik, Corfil, Curt Ebert Siebtechnik, Dorstener Siebtechnik, Daltec, Dustcontrol, DYNA Instruments, EIPA Eisen Palmen, Maschinenfabrik Gustav Eirich, endeco, ESTA Apparatebau, EZM, Fasse-Filter, Wolfgang Feist, Feld-Kleinerüschkamp, Festo, Fielenbach Fördertechnik, Fischbei Deutschland, Fog Systems, Fördertechnik Ulf Kecke, FTK-Förderband Technik Kilian, Georg Stein, Glass, GRINDERMAX, H+E Logistik, Hansmeier Steuerungstechnik, HASLER, HBM Hottinger Baldwin Messtechnik, Hein, Lehmann, HFB Wälzlager, Humbert & Pol, Humpe Fördertechnik, HUZAP, IFE Aufbereitungstechnik

Part VI:

A.B.S. Silo- + Förderanlagen, AGRICHEMA, AKT Artur Küpper, AML Anlagentechnik, Arodo, Atlas Copco Kompressoren, AZO, B+W, Bar, Barl, Bauermeister Zerkleinerungstechnik, Brookfield, CeramTec-ETEC, DASAG, DMT, Doppstadt Calbe, Eichholz Silo- u. Anlagenbau, Fenner Dunlop, Flintec, HighTec Ceram, Hoerbiger – IEP Technologies, HORSTMANN Anlagentechnik, HSM, IEM Fördertechnik, Ilchmann Fördertechnik, InduTechnik, INFASTAUB, Intensiv-Filter, J-Tec, J. Engelsmann, Janner Waagen, JAUDT Dosiertechnik, JESMA, JÖST, Kaeser Kompressoren, KAUMAN, Ketten Branscheid, Kitzmann, KMH Kammann, Köllemann, MTS Messtechnik Sauerland, KROHNE Messtechnik, KÜHNE Förderanlagen, Küper, Muhr, NILOS, Schrage Rohrkettensystem, SHA, Wiese Förderelemente, Wilhelm Kurz

Part VII:

AJO, AlBRECHT Ingenieurbüro, Backers, Bechtel GmbH, Carbotechnik Energiesysteme, EBRO Armaturen, F & D Wägetechnik, FKM Magdeburg, Gebr. Ruberg, Gulich`s Nachf., HEICI Befestigungstechnik, HIMMEL Tehnologies, ILC Dover, JetSolutions, INDUS Integrated Bulk Logistics, interVIB, J. Horstmann, JKF Industri, Kettenfabrik Unna,  Ewald Kraft Apparatebau, KURZ Tribotechnik, Lambertz-Solutions, Lammers, LAUMAS Elettronica, LFD Wälzlager, MAHLE Industriefiltration, MARA Fördertechnik, MATO Curt Matthaei, MHC Engineering, Minetecc, Allgaier Process Technology, Mogensen, Maschinenfabrik Möllers, MOORE Systeme, motan-colortronic, Motec Ingenieurbüro, Müller & Borggräfe, Muller Beltex, mütec Instruments, NEBOLEX Umwelttechnik, NORRES Schlauchtechnik, Novindustra, Opdenhoff Technologie, Oswald Metzen, P+W Metallbau, PACO Paul, PAUL GROTH Mühlenbau, pewag Deutschland, PFE Pneumatische Fördersysteme Eschweiler, Pionier Absaugtechnik, Plymoth-Plymex, Polytec Thelen, Prodima Mixers, ProLeit, Promati, PUCEST protect, Rechner Sensors, RENNER Kompressoren, RICO Sicherheitstechnik, RK-Prozesstechnik, ROSTA, RSBP, RUWAC Industriesauger

Part VIII:

A. Leering Enschede, A.S.T. Angewandte System-Technik Dresden, ACCENT Metalltechnik, AJK Hydrolift, ARICON Kunststoffwerk, ARTA Armaturen- und Tangerätebau, B&F Metallbautechnik, Bakker Magnetics, Beloh Magnetsysteme, Baljer & Zembrod, Bernd Münstermann, BT-Wolfgang Binder, Safeline Bühning & Joswig, Castolin, Corodut Verschleiss-Schutz, Dahlman Filter Services, Danvaegt, DFT Deichmann Filter Technik, DOLAV Germany, Erdwich Zerkleinerungssysteme, FilterCare, foxiflex, Anlagenbau Gelting, Görmer – Kloska Group, H&S Scheuten, Hanse Chemie, Havelberger Fahrzeug- und Maschinenbau, Huning Maschinenbau, Komptech, RMS – Lüra, Müller Containersysteme, Narviflex, Neo System Tec, Neuenhauser Maschinenbau, Nuova Guseo, ORBINOX Germany, PAARI Waagen- und Anlagenbau, PIV Drives, reCyclix,  Redwave, ReSiTec, Rice Lake Weighing Systems Europe, Rosenbauer International, Rotogal, S&W Rohrsysteme, SBM Mineral Processing, isoschall Schlauch- und Armaturentechnik

Part IX:

Schloemer GmbH, K.A. Schmersal Holding, Prestel Schneckenbau, Scholz Dosiertechnik, Schrage GmbH Anlagenbau, Schreier Maschinen- und Apparatebau, SCHULZ Systemtechnik, sesotec GmbH, SEW-EURODRIVE, SGH Schüttguthandling, Siebtecnik, Siemens AG, SIGMA Maschinenbau, solids solutions group, SPALECK, SBB Wägetechnik, Anlagenbau Stampfer, Steinhaus GmbH, SteriValves, steute Schaltgeräte, STIF, Stokkermill, Stricker GmbH, SWR engineering Messtechnik, SYMPATEC, SysTec, T.S.I.-Deutschland, TAMA SpA, TAWI GmbH, Technogenia Verschleissschutz, TEDIMA, Thermo Scientific, Thiele Kettenwerke, THM Recycling Solutions, REMA TIP ZOP, TMG Maschinenbau, TransiTec Anlagenbau, transitube tim plast, Tridelta Magnetsysteme, TRIPLAN AG, TTS Trump Technik, UMTEC Silo-Anlagentechnik, Unitrak Powderflight, Van der Graaf Antriebstechnik, VAUTID GmbH, Imtech Ventilex B.V., VHV Anlagenbau, Vi-An Vibrationsmaschinen, Vibra Schultheis, Vibrowest Italiana, VKT Verschleissschutz, Volkmann GmbH, VST Engineering, Waagen Döhrn, Wagner Maschinen, WAKRO, Walter Gerätebau, Walter Gondrom, SILGON, Wansor Baumaschinenausrüstung, Warex Valve, Wegen GmbH, Wehling Anlagen- u. Maschinenbau, Welding Alloys Deutschland, Werkstätten GmbH, Grupa Wolff, ZELO

Part X: The Bulkoholics

 

Part I: The bulk-online Leaders & Sponsors.

Part I of this Photo Gallery concentrates on the bulk-online Leaders and Sponsors, i.e. those companies which support the Powder/Bulk Portal most. Without them, this Portal would hardly exist. In the name of the global Bulkoholics community we extend our thanks to these presently about 35 companies.

WAMGROUP, REMBE, Schenck Process, Coperion + Coperion K-Tron, Vortex, FLSmidth, Martin Engineering, Mettler Toledo, Brabender Technologie, Stanelle Silos + Automation, Geroldinger, RULMECA, Tridelta Siperm, CMS / Cablevey Conveyors, Eriez, Sandvik, Jansen & Heuning,

————————

 

We invite your feedback with corrections and additions of missing names, also for the respective eDirectory listings. Please email your comments to wohlbier@bulk-online.com . Your cooperation is very important for our worldwide leading bulk-online Information Center. We strive at the highest possible perfection, but without your continuous input and help we are bound to fail.

The importance of these Shows and also of our Photo Galleries and their enormous advertising potential, can be seen in the views figures of earlier Easyfairs venues (as of December 28, 2015).

Dortmund 2014
(159,407 views)

Dortmund 2012
(166,495 views)

Dortmund 2011
(343,448 views)

Dortmund 2009
(257,438 views)

Duisburg 2008
(162,728 views)

Duisburg 2006
(189,635 views)

All photos by Florian Sonntag and by  Ute and Reinhard Wöhlbier, and in Part X: The Bulkoholics also by Easyfairs.

Comments, corrections, suggestions and photo removal requests should be addressed to wohlbier@bulk-online.com

Copyright © 2015 by Online Services Dr. Wöhlbier

————————

 

4B_Braime

 

 

4B Deutschland

 

Schüttgut 2015

4B_Deutschland
Birgit Kwasniewski, Sales Manager, (center) with Ute Wöhlbier (left)

 

More information on 4B Braime Components Ltd.

More information on 4B Deutschland

Google Search – Web

Google Search – Images

4B Braime Videos on bulk-online

4B Braime on the Portal

————————

 

attachment

 

 

AKO Armaturen & Separations GmbH

Schüttgut 2015: EUROPA, DEUTSCHLAND, NORDRHEIN WESTFALEN, DORTMUND, 04.11.2015: Schüttgut 2015. - Florian Sonntag

AKO
Jan Wolke, Sales (left) and Helmut Hessinger, Sales Manager

More information on AKO

Google Search – Web

Google Search – Images

AKO Armaturen Videos on bulk-online

AKO on the Portal

————————

ALDAK_Logo

 

 

 ALDAK GmbH Vibrationstechnik

Schüttgut 2015

ALDAK_rhw_1200

More information on ALDAK

Google Search – Web

Google Search – Images

ALDAK on the Portal

————————

Berthold_Technologies

 

 

Berthold Technologies

Schüttgut 2015

Berthold_Technologies_2

More information on Berthold Technologies

Google Search – Web

Google Search – Images

Berthold Technologies on the Portal

————————

 

DMN-WESTINGHOUSE

Schüttgut 2015

DMN_1200

More information on DMN-Westinghouse

Google Search – Web

Google Search – Images

DMN Videos on bulk-online

DMN-Westinghouse on the Portal

————————

202054

 

 

Schüttgut 2015: EUROPA, DEUTSCHLAND, NORDRHEIN WESTFALEN, DORTMUND, 04.11.2015: Schüttgut 2015. - Florian Sonntag
Joe Roettle, Global Sales Manager (left)

More information on Ecutec Barcelona

Google Search – Web

Google Search – Images

Ecutec Videos on bulk-online

Ecutec Barcelona on the Portal

————————

ESI Eurosilo

 

ESI Eurosilo BV

Schüttgut 2015: EUROPA, DEUTSCHLAND, NORDRHEIN WESTFALEN, DORTMUND, 04.11.2015: Schüttgut 2015. - Florian Sonntag

ESI_Eurosilo_Jaap_Ruijgrok
Jaap P. J. Ruijgrok, MD, ESI Eurosilo

More information on ESI Eurosilo BV

Google Search – Web

Google Search – Images

ESI Eurosilo Videos on bulk-online

ESI Eurosilo on the  Portal

————————

Flexco

 

 

 

Flexco Europe GmbH

Flexco

 

FLEXCO

More information about FLEXCO

Google Search – Web

Google Search – Images

FLEXCO on the  Portal

————————

Haver_Boecker

 

 

 

 

Haver & Boecker Maschinenfabrik

 

Schüttgut 2015

More on Haver & Boecker

Google Search – Web

Google Search – Images

Haver & Boecker on the Portal

————————

Hense Waegetechnik GmbH 

Hense Waegetechnik

Schüttgut 2015

More information on Hense Waegetechnik

Google Search – Web

Google Search – Images

Hense Waegetechnik Video on bulk-online

Hense Waegetechnik on the Portal

————————

Jacob_logo_new_350

 

 

 

Fr. Jacob Söhne GmbH & Co. KG

 

Schüttgut 2015

Schüttgut 2015

Schüttgut 2015

 

More information on Jacob

Google Search – Web

Google Search – Images

Jacob  Videos on bulk-online

Jacob on the Portal

————————

MBA_Instruments_logo

 

 

 MBA Instruments GmbH

MBA Instrument


More information on MBA

Google Search – Web

Google Search – Images

MBA Instrumentson the Portal

————————

Name: Russell_Finex_Logo_200.jpg<br /><br /><br /><br /> Views: 45<br /><br /><br /><br /> Size: 44.9 KB

Russell Finex N.V.

Russell_Finex

More information on Russell Finex

Google Search – Web

Google Search – Images

Russell Finex Videos on bulk-online

Russell Finex on the Portal

 

Artexis_GROUP_logo

Direct Heat or Indirect Heat for Rotary Dryers

One of the most important factors in determining the type of rotary dryer that is most appropriate for a certain process is the usage of direct or indirect heat.  Rotary dryers are capable of utilizing either direct convection style heat transfer or indirect heat transfer, in which hot surfaces within the dryer provide heat by conduction and radiation.  The determination of direct or indirect drying is contingent on the properties of the material to be dried, the process conditions and the desired end product.

Interior of a Heyl & Patterson Rotary Dryer
Interior of a Heyl & Patterson Rotary Dryer

Rotary dryers are versatile machines, and can be configured to meet a wide range of needs and applications.  In terms of direct drying, hot air enters the rotating cylinder at one end, passes through it and exits at the other end.  Flights welded to the internal walls of the cylinder lift and shower the wet material, bringing it into direct contact with the hot air.  Configuration of the flights depends on the characteristics of the material being processed.  This configuration is customized to efficiently handle the product as it flows through the dryer.  The length and diameter of the cylinder are also customized according to the capacity of the dryer and the characteristics of the product.

Typically, a rotary dryer is filled to 10-15 percent of cylinder volume.  The length of the cylinder is usually at least four times the diameter in order to achieve efficient heat transfer and temperature equilibrium between the product and the air stream.

The airflow in direct heat rotary dryers can be either counter or parallel to the conveyance of the material inside the dryer.  Parallel flow dryers expose the wet feed material to the hottest air temperature.  They are very efficient for handling high moisture content sludge and filter cakes.  Because of the rapid heat exchange, there is significant evaporative cooling of the product.  This cooling effect allows for drying a wide range of materials with varying heat sensitivities without thermally degrading the materials.

Heyl & Patterson Rotary Dryer
Heyl & Patterson Rotary Dryer

Counter flow dryers expose the driest material to the highest air temperature.  This configuration is usually best for processes that require a specific elevated discharge product temperature or very low moisture content.

Indirect heat rotary dryers are most frequently used for products with small particle sizes that could result in excessive dust generation.  They are also used for processes that require extreme control of the dryer exhaust.  Indirect heat dryers depend on conduction and radiation to transfer the heat from the cylinder walls to the wet feed.  A stationary furnace surrounds the rotary cylinder and heats the cylinder walls.  Little or no airflow is required to pass through the dryer.  Indirect dryers can provide only a limited amount of heat transfer area.  They cannot efficiently handle materials that tend to stick to the heated walls of the cylinder.

Heyl & Patterson manufactures both types of dryer through its Renneburg Division, and offers a pilot plant testing lab to determine the best technology and equipment for a customer’s operations.

Rotary dryers designed by Heyl & Patterson are built to each customer’s requirements.  Because every dryer is custom engineered and the original drawings are maintained in-house, any unit can be serviced with upgrades or repairs according to its original specifications for the life of the equipment.  Heyl & Patterson also provides superior customer support before, during and after the purchase on each product supplied by the company.

Author:  David Phillips
Heyl & Patterson, USA

 

Heyl & Patterson Celebrates 125 Years in Business

Heyl & Patterson Videos on bulk-online

Schenck Process: New Supplied Air Extruder (SAE) Hood Reduces Air Turbulence

Designed to remove extruded material away and effectively start the pneumatic conveying process to the dryer from the extruder, the new Supplied Air Extruder (SAE) Hood from Schenck Process is loaded with innovations that are critical to the pet food manufacturing process.

Continue reading Schenck Process: New Supplied Air Extruder (SAE) Hood Reduces Air Turbulence

thyssenkrupp wins major contract to build one of the largest cement plants in Saudi Arabia

thyssenkrupp has won a contract from Yamama Saudi Cement Company, one of Saudi Arabia’s biggest cement producers, to build two turnkey cement clinker production lines. The two lines with an overall capacity of 20,000 tpd cement will be built at a new site around 80 km east of the capital Riyadh. The value of the contract is in the higher three- digit million euro range. It is the largest cement contract ever secured by thyssenkrupp.

Continue reading thyssenkrupp wins major contract to build one of the largest cement plants in Saudi Arabia

Photo Gallery: Solids & Recycling-Technik Dortmund 2015 – Part I

On November 4 and 5, 2015  these two powder/bulk trade shows took place in Dortmund, Germany:

Schüttgut (SOLIDS) +
Recycling Technology

Schüttgut_Logo_2015Recycling_Logo_2015

As in previous years, The Powder/Bulk Portal presents a Photo Gallery which may help future potential exhibitors and visitors to plan their attendance and visit.

The presentation is divided into 10 Parts (Part I to Part X). Please search specific Parts or companies in the Contents below:

CONTENTS

(Please scroll down or select another Part)

Part I: The bulk-online Leaders & Sponsors.

Part I of this Photo Gallery concentrates on the bulk-online Leaders and Sponsors, i.e. those companies which support the Powder/Bulk Portal most. Without them, this Portal would hardly exist. In the name of the global Bulkoholics community we extend our thanks to these presently about 35 companies.

WAMGROUP, REMBE, Schenck Process, Coperion + Coperion K-Tron, Vortex, FLSmidth, Martin Engineering, Mettler Toledo, Brabender Technologie, Stanelle Silos + Automation, Geroldinger, RULMECA, Tridelta Siperm, CMS / Cablevey Conveyors, Eriez, Sandvik, Jansen & Heuning,

Continue reading Photo Gallery: Solids & Recycling-Technik Dortmund 2015 – Part I

Rulmeca Publishes New Motorized Pulley Brochure

Rulmeca Corporation has published a new Motorized Pulley flyer for the convenience of bulk materials handling conveyor engineers and operators in North America. Filled with useful illustrations and technical information, this eight page document will help managers solve a variety of conveyor problems including conveyor drive reliability, abrasion, corrosion, size restrictions, belt slippage, belt tracking and extreme temperatures.

Continue reading Rulmeca Publishes New Motorized Pulley Brochure

METTLER TOLEDO: Improved Weigh Module Delivers Higher Accuracy and Safety

The SWB505 MultiMount™ weigh module now comes with new and improved load-cell technology for even higher accuracy that was possible before. It is easy and safe to install and has received OIML C6 and NTEP IIIM approvals for use in applications with a high-accuracy requirement.

Continue reading METTLER TOLEDO: Improved Weigh Module Delivers Higher Accuracy and Safety